California • Armed Security Licensing • BSIS
California BSIS Firearms Permit for Armed Security Guards — Requirements, Training, Fees and Renewal (Updated for 2027)
A California guard registration and a BSIS firearms permit have separate expiration dates. The firearms renewal application requires a current permit, timely qualification records and the $126 payment. The form lists $88 for renewal and $38 for DOJ. A renewed guard card cannot extend an expired firearms permit.
A California Guard Card does not automatically allow you to work armed. Most armed security guards in California need a valid BSIS Security Guard Registration plus a valid BSIS Firearms Permit, often called an exposed firearm permit or FQ.
This page explains who needs the permit, eligibility basics, the firearms assessment, training and range qualification, Live Scan/background check costs, firearms permit fees, exposed-carry limits, renewal rules, employer verification, and the difference between Guard Card authority and armed authority.
Official sources checked October 6, 2026. Added assessment recency and retake rules, identified $60/$69 and 85%/86% official-source differences, clarified joint fingerprints, uniform/employment limits, renewal simulator restrictions, DOJ paperwork and 90-day filing window. Current California statute and credential-specific BSIS forms were compared with the published guidance. Relevant older-source differences and future operative dates are stated below.
Independent resource: Security Force USA is not affiliated with, endorsed by, or sponsored by the California Bureau of Security and Investigative Services, the California Department of Consumer Affairs, the California Department of Justice, the FBI, PSI, or the State of California.
Not legal advice: This page is general educational guidance. It does not teach firearm tactics, use-of-force decisions, or legal strategy. If Security Force USA and an official California source conflict, follow the official source.
Quick answer: how to become an armed security guard in California
To work armed as a California security guard, you generally need a current BSIS Security Guard Registration, eligibility to possess firearms under state and federal law, completion of the BSIS firearms assessment when required, Power to Arrest training, BSIS firearms training through a Bureau-approved firearms training facility/instructor, written exam and range qualification, DOJ/FBI background check, and a BSIS Firearms Permit that lists the qualifying license type and caliber(s) you are authorized to carry.
- Guard Card alone is not enough: armed work normally requires a separate BSIS Firearms Permit.
- Age: BSIS firearms permit applicants must be at least 21.
- Status: applicants must be U.S. citizens or have permanent legal immigration status.
- Firearm eligibility: applicants must not be prohibited from owning or possessing firearms under state or federal law.
- Assessment: a BSIS security guard registrant seeking an initial firearms permit must pass the firearms assessment before applying.
- Training: applicants must complete Power to Arrest and BSIS firearms training/qualification.
- Limits: the permit authorizes exposed carry only for the listed license type(s) and listed caliber(s).
- Renewal: a firearms permit expires two years from issuance and cannot be renewed after expiration.
California security licensing toolkit
Use this page for armed-security and exposed firearm permit guidance. Use the related California pages below for the Guard Card, training, Live Scan, fees, renewal, and lookup steps.
Related planning: U.S. training and licensing pillar, legal compliance hub, tools hub, eligibility checklist and salary calculator. Use the regulator for the actual licensing decision.
Guard Card vs BSIS Firearms Permit
A California Guard Card is the baseline BSIS Security Guard Registration. A BSIS Firearms Permit is a separate credential that authorizes the permit holder to carry an exposed firearm while performing the duties of only the qualifying license type(s) listed on the permit.
Guard Card
Base Security Guard Registration. It supports many unarmed security posts but does not, by itself, authorize armed work.
BSIS Firearms Permit
Separate exposed firearm permit linked to eligible BSIS license type(s), training, assessment, background checks, and approved caliber(s).
Plain-English warning: do not accept, assign, or advertise armed California security work based only on a Guard Card. Verify the firearms permit separately through the official lookup.
Who needs a BSIS Firearms Permit?
A BSIS Firearms Permit is needed when a person carries an exposed firearm while performing duties under an eligible BSIS license type. For most armed security guards, that means the Firearms Permit is associated with a Security Guard registration.
- Security guards who carry an exposed firearm while on duty.
- Qualified individuals whose firearms permit is associated with a listed BSIS license type.
- Applicants who have qualified with the caliber(s) they intend to carry.
- Permit holders whose firearms permit card actually lists the license type and caliber(s) relevant to the assignment.
Eligibility basics for a California BSIS Firearms Permit
BSIS lists the baseline eligibility conditions for a firearms permit. This page summarizes them for planning only; always review the official BSIS Firearms Permit Fact Sheet before applying.
| Requirement area | What BSIS expects | Practical note |
|---|---|---|
| Age | At least 21 years old. | Do not pay for armed-security application steps if you are not old enough. |
| Immigration / status | U.S. citizen or permanent legal immigration status. | Use the official application instructions for acceptable proof and declarations. |
| Firearm eligibility | Not prohibited from owning or possessing firearms under state or federal law. | Background issues can be serious; get qualified legal advice if unsure. |
| Eligible BSIS license type | Security Guard registration or another eligible BSIS license type listed by BSIS. | For most guards, this means the firearms permit must be associated with the Security Guard registration. |
| Background check | DOJ and FBI criminal history background check. | Live Scan or hard-card route depends on where you apply from and official instructions. |
Assessment: before application, with six-month recency
The BSIS January 2026 assessment guidance explains the 16pf assessment for the security-guard firearms association. For an initial permit when required, the assessment must be passed before applying and within six months before submission. A passing result does not replace the application, firearms course, screening or approval.
The current assessment page gives a $69 fee paid directly to PSI. The October 2025 initial application still prints $60; this guide uses the newer dedicated January 2026 assessment instruction and makes that difference explicit.
Keep the score report. A “Did Not Demonstrate” result means the initial application cannot be submitted on that result. The current guidance permits a retake 180 days after that result, with the waiting period beginning the day after the assessment. Do not confuse that waiting period with the six-month recency of a passing assessment.
Adding a guard registration to an existing permit can also trigger assessment requirements. Check the exact association with BSIS instead of assuming an existing permit or another occupational license exempts it.
Training and examination: current forms versus older summaries
Use a Bureau-approved Firearms Training Facility and certified Firearms Training Instructor, verified through DCA License Search. The Section 635 course requires traditional classroom training, followed by the prescribed range training and qualification. This separate firearms course does not replace Guard Card arrest/use-of-force training or its current classroom requirements.
The October 2025 initial application requires a written firearms score of 86% or greater and a minimum 80% range score. Its scoring instructions require at least 45 correct points out of 52. Range qualification follows completion of classroom instruction and passing the written examination, and must occur within 30 days of the classroom instruction.
The initial range qualification must use live ammunition; a simulator is not allowed for an initial permit. Qualification must cover each caliber to be listed on the permit. The certified instructor completes the certification page; the applicant must not fill it in or alter the instructor’s entries.
Official-source difference: the January 2025 firearms fact sheet says 85% for the renewal written examination, while both current October 2025 initial and renewal forms specify 86%. Use the current application and instructor certification for the actual transaction; seek Bureau clarification if a provider relies on the older summary.
Qualifying active peace officers have documented statutory training provisions, with limits that differ by associated license type. The current forms require evidence of status and completed training; they do not create a blanket exemption for anyone with prior police or military service.
Application sequence and the combined fingerprint option
- Identify the individual qualifying credential. The permit must be associated with the license type used for the duties; a corporate company’s license does not automatically qualify an officer personally.
- Pass the assessment when required. Observe the six-month pre-application limit and use the current dedicated assessment instructions.
- Complete approved firearms training. Keep the instructor-completed certification, scores and qualified calibers.
- Submit the application and $110 Bureau fee. BreEZe applicants must upload the completed initial application and supporting certification.
- Then submit fingerprints. The initial application says not to Live Scan before the application. Earlier prints for the Guard Card do not automatically satisfy the separate firearm check.
- Verify approval and both credentials before armed duty. Check the associated license, permit status, expiry and listed calibers.
The current firearms application expressly permits one combination Live Scan form when applying for a qualifying BSIS license and firearms permit together. Use the Bureau’s correct combined form, such as Security Guard with Firearm. It states that the qualifying-license and firearm results are withheld until the FBI, DOJ criminal-history and DOJ firearms responses are all complete.
This specific combined-application option is different from reusing old prints from a previously issued credential. The general Guard Card application says separate prints for each license, so use the credential-specific combined instructions for this situation and confirm the route with BSIS if needed. The Bureau fingerprint page gives the payment-dependent waiting instructions and the two-hard-card alternative when California Live Scan is unavailable.
The October 6, 2026 weekly processing table lists a nondeficient initial firearms target of 75 days and renewal 60 days. The initial form’s generic “allow 60 days” statement is older than the live table. These targets are estimates, not permission to carry before approval.
Fees and extra costs
Armed-security applicants should budget for several different costs: BSIS state fees, firearms assessment fee, DOJ/FBI background check fees, Live Scan rolling-site fee, training tuition, range costs, and any employer-required costs.
| Cost item | Current amount / note | Paid to |
|---|---|---|
| BSIS Firearms Permit initial application | $110 | BSIS |
| BSIS Firearms Permit renewal | $126 | BSIS / DOJ component per official renewal materials |
| Replacement firearms permit pocket card | $25 | BSIS |
| Firearms Assessment | $69 | PSI |
| Firearms permit DOJ/FBI background check | $87 | Background check processing, plus Live Scan rolling-site fee |
| Training and range costs | Varies | Training provider / range / employer arrangements |
Full fee reference: California BSIS Guard Card Fees.
Exposed carry: uniform, actual employment and listed caliber
A firearms permit is not a concealed-carry license. Under the Private Security Services Act and current application, it authorizes exposed carry only for the qualifying occupational duties and calibers listed on the permit. A Guard Card and firearms permit do not confer general law-enforcement authority or unrestricted off-duty carry.
For ordinary security-guard duties, verify the required uniform and employment arrangement. Section 7583.3(c) restricts the registered guard’s firearm duties to employment by a licensed Private Patrol Operator, or the State of California or a political subdivision. A personal Guard Card does not authorize direct security contracting with customers.
When a caliber is added, Bureau approval and the permit’s listing matter. The fact sheet also requires subsequent renewal qualifications with the added caliber to retain it. An instructor’s range certificate alone does not add authority to the issued permit.
Keep the qualifying registration and firearms permit current independently. Do not assign armed duties when either necessary credential is expired, suspended or otherwise unusable for the assignment.
Renewal: four qualifications, limited simulators and current paperwork
The current renewal form requires filing and payment at least 60 days before expiry; applications received more than 90 days before expiry are returned. The older fact sheet calls the earliest window three months. This is the firearms window, separate from the Guard Card’s 120-day window.
During the two-year term, complete four range qualifications: two in each twelve-month period, with no two closer than four months apart. Before each qualification, complete the prescribed two-hour review of use of force and de-escalation.
Only one qualification in each twelve-month period may use a simulator. It must meet the specified realistic operation, caliber-matching, loading and reloading requirements; at least one qualification in each period is therefore live-fire. A generic simulator session is insufficient, and simulators are prohibited for an initial permit.
The current renewal form requires the written examination with 86% or greater; it recommends taking it during the second twelve-month period, while noting that the law does not fix which qualification must include it. The older fact sheet’s 85% description differs from the current instructor certification.
Submit the instructor-certified qualification/review pages and the completed, signed DOJ Biennial Firearms Permit Qualification Application, BOF 4040A. It is attached to the current renewal packet; follow its copy and identity instructions. The total fee is $126: $88 renewal plus $38 DOJ.
An expired firearms permit cannot be renewed. A pending renewal or paid receipt does not extend carry authority after expiry. The new initial route after lapse has its own assessment, training, application and screening requirements. Qualifying officer provisions must be documented under the applicable statutory and form requirements.
Approval printout: issued permit, not application evidence
The initial form and renewal form allow holders of an approved firearms permit associated with a Security Guard registration to work while the hardcopy arrives using a hardcopy DCA License Search approval printout plus valid picture ID. The underlying registration and all duty conditions must also be satisfied.
This does not allow ordinary applicants to carry while their licensing decision is pending. A training certificate, assessment result, payment or Live Scan receipt is not an issued permit. See the verification guide and check the live DCA record.
Employer verification and compliance notes
Employers, supervisors, and schedulers should verify armed authority directly. A copy of a Guard Card, old firearms permit, training certificate, or range qualification form is not enough by itself.
- Verify the worker has a current BSIS Security Guard registration if assigned as a security guard.
- Verify the BSIS Firearms Permit separately.
- Confirm the firearms permit lists the Security Guard registration or other correct license type for the role.
- Confirm the approved caliber(s) match the intended duty equipment.
- Check the expiration date before armed assignment.
- Keep appropriate verification records according to employer policy and privacy rules.
- Recheck before renewal windows and contract-sensitive posts.
Firearm reporting has separate clocks under Sections 7583.2–7583.4: the employee notifies the employer within 24 hours of discharge; the registered guard and employer report to BSIS and the local police/sheriff within seven days. The PPO has a separate seven-business-day report for discharge or the specified public altercations. Do not replace every duty with one deadline.
Official sources and review limits
- Current Private Security Services Act, Article 4
- Current initial firearms application and instructor certification
- Current firearms renewal form and DOJ attachment
- BSIS firearms fact sheet
- January 2026 firearms assessment instructions
- BSIS firearms and renewal training regulations
- Current BSIS fee schedule
- Current fingerprint sequence and charges
- Guard and firearm combination fingerprint form
- DCA License Search
- October 6, 2026 processing timeframes
The current application and renewal instructions are used for their specific transactions. Some older government summaries differ, so the difference is explained beside the instruction. Check individual eligibility and unusual records directly with BSIS.
California BSIS Firearms Permit FAQs
How recently must the required firearms assessment have been passed?
For an initial firearms permit when the assessment is required, it must be passed before submitting the application and within the six months preceding submission. A passing result is not a firearms permit or permission to carry.
Why does the current firearms application still print a $60 assessment fee?
The October 2025 initial form retains $60, while the newer dedicated January 2026 BSIS assessment page gives $69 paid to PSI. This guide follows the newer assessment instruction and identifies the official-source difference.
Is the firearms written-exam requirement 85% or 86%?
Both current October 2025 initial and renewal forms require 86% or greater; their scoring instructions require 45 correct points out of 52. The older January 2025 fact sheet describes 85% for renewal. Use the current transaction form and instructor certification, and ask BSIS if the provider relies on the older summary.
Can a jointly filed Guard Card and firearms application use one Live Scan?
The current firearms initial application permits the appropriate combination Live Scan form for a qualifying BSIS license and firearms permit applied for together. Results are withheld until FBI, DOJ criminal-history and DOJ firearms responses are complete. This does not mean old prints from an earlier credential are reusable.
May all four renewal qualifications be completed using a simulator?
No. Only one qualification in each twelve-month permit period may use a compliant simulator, so at least one in each period must be live-fire. Two qualifications are required in each period, no two closer than four months apart; each requires the prior two-hour use-of-force and de-escalation review.
Does the firearms renewal accept a filing 120 days before expiry?
The current firearms renewal form returns applications received more than 90 days before expiry and requires filing and payment at least 60 days before expiry. Do not borrow the Guard Card 120-day window. An expired firearms permit cannot be renewed.
Which DOJ document belongs with my firearms renewal?
The current renewal packet includes BOF 4040A, the Biennial Firearms Permit Qualification Application. Complete and sign it, follow its copy instructions, and submit it with the certified qualification pages and $126 total fee, comprising $88 renewal and $38 DOJ.
What proof is allowed when an approved firearms permit card is in the mail?
For an approved permit associated with Security Guard registration, the current forms allow a hardcopy DCA License Search approval printout with valid picture ID while awaiting the card. The registration, uniform and duty conditions still apply; a pending application or paid receipt is insufficient.
Legal and safety disclaimer
Not legal advice: This page is provided by Security Force USA for general informational purposes only. It does not replace BSIS rules, California law, employer policy, official application instructions, firearms training, range instruction, legal counsel, or any use-of-force training required by law or employer policy.
Firearms laws, BSIS permit rules, training requirements, assessment requirements, fee amounts, qualification schedules, Live Scan instructions, and renewal rules can change. If this guide differs from BSIS, DCA, DOJ/FBI instructions, PSI instructions, or another official source, the official source controls.
Safety note: This guide does not provide tactical firearm instruction or advice on when to use force. Armed security work carries serious legal and safety risk. Follow official training, employer policy, post orders, and applicable law.


