California Licensing Toolkit • BSIS and DOJ Background Checks

California Live Scan for Security Guards — BSIS Fingerprinting, Forms, Fees, ATI Number and Common Delays (Updated for 2027)

Start with the application and payment method. BSIS fingerprint instructions allow a BreEZe applicant to proceed after paying online. With a mailed personal check, wait for it to clear. BSIS gives different estimated waits for other paper payments. Bring the form for the precise credential you applied for.

Written by · Published: · Last updated:

A California BSIS Security Guard Registration, commonly called a California Guard Card, requires a criminal history background check through the California Department of Justice and the FBI. Most California applicants complete this through Live Scan, California’s electronic fingerprinting system.

This guide explains when to complete Live Scan, which BSIS form to use, what the ATI number is, how fees work, why wrong form coding causes delays, what out-of-state applicants should do, and why a training certificate or Live Scan receipt is not the same as BSIS approval.

October 6, 2026 review record. Added exact payment-dependent fingerprint timing, ORI routing, mandatory two-card and fee details, baton screening scope and the current joint-application exception; replaced nine FAQs with eight aligned answers.

Independent resource: Security Force USA is not affiliated with, endorsed by, or sponsored by the California Bureau of Security and Investigative Services, the California Department of Justice, the California Department of Consumer Affairs, or the State of California.

Not legal advice: This page is general educational guidance. If Security Force USA and an official California source conflict, follow the official source and contact BSIS or the California DOJ if you need clarification.

Quick answer: California Live Scan for a Guard Card

For a California Guard Card, submit your BSIS application first, then complete the criminal history background check using the correct BSIS Security Guard Live Scan form. Bring valid photo identification, pay the DOJ/FBI processing fees and the Live Scan site fee, keep the completed Live Scan form with the ATI number and Live Scan operator signature, and verify progress through official BSIS and DOJ tools.

  • Submit the application first: BSIS says FBI guidelines require applicants to complete the criminal history background check after submitting the application.
  • Use the right form: Live Scan requests are specific to the BSIS license type.
  • Standard Guard Card: use the BSIS Security Guard Live Scan form.
  • Guard with Firearm: use the correct BSIS Security Guard with Firearm form, but read the combination-form warning below.
  • Details must match: your name, date of birth, and Social Security number on the Live Scan form must be identical to your application details.
  • Keep the ATI number: you need the ATI number and date of birth to check DOJ background check status.
  • Training is not approval: a certificate, receipt, or pending application does not mean BSIS has issued the registration.

California security licensing toolkit

Use this page for Live Scan and background checks. Use the related California pages below for the full Guard Card application, training, renewal, lookup, and armed-security pathway.

When to fingerprint: application and payment first

The current Guard Card application and fingerprint instructions require submission before the background check. The older general application-delays page says fingerprints first; follow the newer credential-specific transaction instructions and ask BSIS about any mismatch.

  • BreEZe: complete submission and pay the application fee before the appointment.
  • Paper application paid by personal check: wait until DCA has cashed the check.
  • Mailed money order or cashier check: the Bureau specifies about five business days before fingerprinting.
  • In-person cash payment: its fingerprint instructions specify about two business days; confirm accepted payment arrangements before visiting.

Keep the application confirmation, payment evidence, correct form and ATI record together. Completing a background check is a separate step from obtaining approval.

What Live Scan is and why BSIS uses it

Live Scan is California’s electronic fingerprint submission system. A Live Scan operator checks your identification, enters your personal information, captures your fingerprints electronically, and transmits the data to the California DOJ. The DOJ and FBI background check responses then support the BSIS licensing decision.

BSIS says all Bureau requests must be submitted to the DOJ and FBI either by Live Scan or by hard card fingerprint cards. Previously processed submissions, old fingerprint cards, photocopies, or reused fingerprint impressions are not acceptable for a new BSIS request.

Choose the right BSIS Live Scan form

Criminal history background checks are specific to the applicant’s BSIS license type. Using the wrong Live Scan form, wrong license type, or wrong coding can delay or derail your Guard Card application.

Your situationOfficial form to usePractical warning
Standard California Guard CardRequest for Live Scan Service — Security GuardUse this for a standard BSIS Security Guard Registration application.
Security Guard with FirearmRequest for Live Scan Service — Security Guard with FirearmRead the combination-form warning. BSIS has warned that combination fingerprints can delay processing in some license and firearms permit situations.
Private Patrol Operator, baton, training facility, or other BSIS credentialBSIS Live Scan form listDo not use a Security Guard form for a different credential unless BSIS instructions clearly say to do so.

The standard Security Guard form uses ORI A0522 and application type Security Guard. The current baton application does not identify a separate baton-specific Live Scan transaction; its underlying qualifying credential has its own screening. Use the published form for the actual credential rather than inventing a baton check.

Step-by-step: Live Scan for a California Guard Card

01

Submit the BSIS application first

For online applicants, submit and pay in BreEZe before completing the criminal history background check. Keep your BreEZe confirmation and application details.

02

Download the correct BSIS Live Scan form

Use the official BSIS form for your license type. For a standard Guard Card, use the Security Guard Live Scan form. Print or complete the form clearly.

03

Match your personal details exactly

BSIS says your name, date of birth, and Social Security number written on the Live Scan form must be identical to your application. If the information does not match, processing will be delayed.

04

Find a DOJ Live Scan site

Use the California DOJ Live Scan location directory. Review location, hours, appointment requirements, accepted payment methods, and rolling fee before going.

05

Bring valid photo identification and payment

The California DOJ says applicants must present valid photo identification when being fingerprinted. Expired identification information will not be accepted.

06

Keep the completed Live Scan form

The Live Scan operator should enter the ATI number on the form. Keep a copy with the ATI number and the operator signature for your records.

Live Scan fees and background check fees

Live Scan costs normally include a provider site or rolling fee plus DOJ and FBI processing fees. BSIS says the fees are subject to change without notice, so always verify the live BSIS page and the individual Live Scan provider’s current fee before going.

BSIS fingerprint categoryCurrent official fee structure reviewedWhat this means
Any BSIS license type except Firearms PermitDOJ $32 + FBI $17 + Live Scan site fee = $49 plus site feeTypical standard Guard Card Live Scan fee structure, plus the location’s own rolling/site fee.
Firearms PermitDOJ $32 + FBI $17 + firearms eligibility $38 + Live Scan site fee = $87 plus site feeFirearms permit background checks cost more because they include the firearms eligibility component.
Hard card fingerprintsPaid to BSIS according to the hard card instructionsOut-of-state hard card applicants follow separate fee and mailing instructions.

Fee caution: Live Scan site fees vary by location. Use the DOJ Live Scan location directory and call ahead if the payment method, appointment rules, or fee listing is unclear.

The ATI number and DOJ status checks

The ATI number is the Applicant Transaction Identifier generated by the Live Scan device. The California DOJ says the ATI number is used to identify the transaction. BSIS says applicants can check the status of Live Scan results using the ATI number and date of birth on the DOJ applicant status website.

Best practice: protect your ATI number

  • Take a photo of the completed Live Scan form before leaving the site.
  • Keep the paper copy in your Guard Card compliance folder.
  • Save the ATI number with your BreEZe confirmation and training certificate.
  • Do not throw away the receipt after the fingerprints are taken.

DOJ applicant status check: https://applicantstatus.doj.ca.gov/.

Important: BSIS says that unless the DOJ system specifically states that the California/FBI responses were sent to the agency, the Bureau is still waiting for your results.

Out-of-state applicants: two hard cards and separate charges

California Live Scan must be completed in California. If that is unavailable, the Guard Card application and BSIS instructions require two fingerprint hard cards using their prescribed route. Previously used impressions, photocopies and another credential’s earlier response cannot substitute.

The Bureau’s processing charge is $49 for a non-firearms route or $87 for the firearms route. Include the required application/payment evidence with cards submitted after an online application. Follow the instructions for who receives each payment; a local fingerprint-taking fee is separate.

BSIS describes manual hard-card processing as a minimum of about 8–12 weeks. That is a processing estimate for fingerprint responses, not an overall registration approval promise. Do not add it to the licensing target as though either period were guaranteed.

Combined applications: permitted option with a response dependency

The current firearms initial application expressly allows a combination form when a qualifying BSIS license and firearms permit are applied for together, including Security Guard with Firearm. It explains that the license and firearm responses wait until the FBI, DOJ criminal-history and DOJ firearms responses are all complete.

This permitted joint-application route differs from reusing old Guard Card fingerprints for a later firearms application. The general Guard Card application calls for separate submissions per license; use the specific combined route only when its conditions are met. The Bureau’s older processing notice warns of the dependency and discusses separate submissions at higher cost. Confirm an unusual route with BSIS before paying twice.

Training certificate, Live Scan receipt, pending application and BSIS approval

A training certificate, Live Scan receipt, ATI number, payment receipt, or pending BreEZe application is not the same as an issued BSIS Security Guard Registration. Treat those documents as application-support documents, not proof that you can work unsupervised or accept a post.

What these documents prove

  • Training certificate: you completed a course.
  • Live Scan form: fingerprints were submitted.
  • ATI number: the fingerprint transaction can be tracked.
  • BreEZe receipt: an application/payment step occurred.

What you still need

  • BSIS approval and issuance.
  • Official public status through BSIS/DCA lookup.
  • Hardcopy card or official approval printout where BSIS allows it.
  • Employer acceptance and compliance review.

Common Live Scan mistakes and delay reasons

Many Guard Card delays are preventable. Most problems come from mismatched details, wrong forms, old forms, missing copies, or assuming fingerprints were enough to complete the application.

  • Doing Live Scan before submitting the BSIS application: BSIS says the background check comes after application submission.
  • Using the wrong Live Scan form: Live Scan requests are license-type specific.
  • Name, DOB, or SSN mismatch: BSIS says these details must match the application.
  • Unreadable handwriting: BSIS recommends typing the Live Scan form electronically or printing legibly.
  • Not keeping the ATI number: without it, troubleshooting becomes harder.
  • Poor fingerprint quality: DOJ or FBI rejection can require fingerprints to be redone.
  • Application deficiency: incomplete or incorrect BSIS applications can delay processing even if fingerprints were submitted correctly.
  • Combination firearm processing delay: combination Security Guard with Firearm fingerprints can add delay in some situations.

What to do after Live Scan

  1. Save your Live Scan copy. Keep the ATI number and operator signature.
  2. Watch BSIS and BreEZe communications. Respond quickly if BSIS flags a deficiency.
  3. Use DOJ applicant status if needed. You will need the ATI number and date of birth.
  4. Check BSIS processing times. Processing tables are for non-deficient applications and can change.
  5. Verify issuance. Once approved and issued, use the official BSIS/DCA license lookup.
  6. Do not rely on pending status. Wait for BSIS approval before treating the registration as issued.

Next page: California BSIS License Lookup — Verify a Guard Card.

Official sources and review limits

Frequently asked questions

When may I fingerprint after applying online?

Submit the BSIS application and pay in BreEZe first. The current fingerprint instructions allow the appointment after payment; keep the application confirmation and ATI record.

What if I apply on paper with a personal check?

Wait until DCA has cashed the check before completing the criminal history background check. The BSIS instructions separately describe about five business days for mailed money orders or cashier checks and about two for in-person cash payment.

What is the standard Guard Card routing?

Use the current Security Guard Live Scan form, with ORI A0522 and application type Security Guard. Check that the form and identity details match the actual application.

How much are Guard Card fingerprint processing charges?

The BSIS fingerprint page checked October 6, 2026 lists $32 DOJ plus $17 FBI, totaling $49. The fingerprint operator’s rolling fee is additional and variable; the firearms route totals $87 before that fee.

Can simultaneous Guard Card and firearms applications use one form?

The current firearms initial application permits the correct combination Live Scan form for qualifying jointly filed applications. Responses wait until FBI, DOJ criminal-history and DOJ firearms checks are complete. This does not authorize reuse of older prints.

How many hard cards are needed if California Live Scan is unavailable?

The current Guard Card instructions require two fingerprint hard cards. Follow the prescribed payment and submission instructions. BSIS describes manual fingerprint processing as a minimum of about 8–12 weeks, not an approval guarantee.

Does a Baton Permit require a separate baton-only Live Scan?

The current baton application does not specify a separate baton-specific Live Scan transaction. The associated eligible credential must be approved and its own screening requirements remain applicable.

Does the ATI status show that my Guard Card is approved?

No. The ATI identifies a fingerprint transaction and supports the DOJ status check. BSIS still decides the registration application; verify actual issuance and current status through DCA License Search.

Legal and accuracy disclaimer

Not legal advice: This page is provided by Security Force USA for general informational purposes only. It does not replace BSIS rules, California DOJ instructions, California law, employer policy, official application instructions, or advice from a qualified attorney.

Background-check rules, Live Scan forms, fees, processing timelines, hard card instructions, DOJ status tools, and BSIS application requirements can change. If this guide differs from BSIS, the California DOJ, California DCA, or another official California source, the official source controls.

Written by • Founder and Editor, Security Force USA

Update history

October 6, 2026: Added exact payment-dependent fingerprint timing, ORI routing, mandatory two-card and fee details, baton screening scope and the current joint-application exception; replaced nine FAQs with eight aligned answers.

  • May 17, 2026: Rebuilt California Live Scan for Security Guards guide as part of the California cluster upgrade. Added visible last-verified box, clarified application-before-Live-Scan sequence, refreshed official fee structure, added ATI and DOJ status guidance, strengthened wrong-form and mismatch warnings, added Security Guard with Firearm combination-form caution, expanded hard card guidance, added training-is-not-approval warning, added California cluster links, expanded FAQs, official source list, and single JSON-LD @graph schema.
  • December 18, 2025: Earlier California Live Scan guide published with BSIS Live Scan forms, ATI number explanation, out-of-state hard card route, common delay reasons, FAQs, official sources, and structured data.

Related guidance: California licensing hub, U.S. training and licensing pillar, legal compliance hub, tools hub, California fees, license verification and training requirements.

Subscribe To Get the Latest U.S. Security Guard Updates—Straight to Your Inbox.

Before you go, get your free Security Guard Starter Pack

Check your state’s training requirements before you pay. The pack includes a training checklist, an application and cost tracker, and a first-job guide you can use in all 50 states.

Sign up to download the pack. Confirm your email for monthly Security Force USA Updates. Unsubscribe anytime.

Scroll to Top