← Back to U.S. State Security Guard License Requirements
Washington Security Guard License Requirements (Updated for 2027)
Last updated:
Compare the DOL fee for the specific unarmed, armed, company or renewal transaction. For an armed post, verify the firearms certificate and employer relationship separately. Schedule renewal and any firearms qualification by their own deadlines. Washington DOL security guard fees.
Washington contract security guards need a Department of Licensing (DOL) license. The training route is eight hours before assignment, eight hours by a statutory calendar deadline, then four annual refresher hours. Armed work adds age 21, a current Criminal Justice Training Commission (WSCJTC) firearm certificate and DOL armed endorsement.
Quick answer: unarmed, armed or company license?
For non-exempt contract security work, an unarmed guard must be at least 18, be a U.S. citizen or resident noncitizen, have employment or an offer from a licensed company, complete the required training, apply and meet background-check requirements. A properly issued temporary registration card can permit limited unarmed work while the application is processed; a receipt alone does not.
Armed work requires an existing guard license, age 21, a current WSCJTC firearm certificate and the DOL armed endorsement. The firearm must be owned or leased by the employer and within the guard’s qualification. Starting an independent contract guard business requires a company license even if it has no other employees. Sources: RCW 18.170.030–.060 and .090, DOL unarmed application and armed application.
Washington at a glance
| Item | Requirement |
|---|---|
| Regulators | DOL licenses guards/companies; WSCJTC administers firearm certificates. |
| Minimum age | 18 unarmed; 21 armed. |
| Initial guard training | Eight pre-assignment hours, then eight post-assignment hours by the half-year statutory deadline below. |
| Later refresher | Four hours each subsequent statutory year; no more than one customer-service hour and at least three emergency-response hours. |
| Temporary card | Maximum 60 days, only for its issuing company, and no firearm authority. |
| Guard fees | $101 initial; $95 annual renewal; $10 armed endorsement. Other charges can apply. |
| Firearm certificate fees | $200 issuance; $100 transfer; $100 renewal after more than 30 days of expiry, effective July 1, 2026. |
| Renewal | Annual; DOL renewal opens up to 120 days before expiry. An expired license does not permit work. |
Sources: Chapter 18.170, WAC 308-18, DOL current fees, renewal instructions and May 2026 firearm certificate notice.
Official Washington rules and narrow exemptions
The Washington State Department of Licensing administers guard and guard-company licensing under RCW 18.170 and WAC 308-18. WSCJTC separately administers firearms certification under WAC 139-30. Current DOL resources include unarmed applications, armed applications, fees, renewal and September 2026 programme news.
In-house, police and event-staff exceptions
RCW 18.170.020 excludes a person employed exclusively or regularly by one employer solely for that employer’s affairs where the employer is not a private security company. It also exempts official-duty sworn peace officers and narrowly qualified, locally approved off-duty police work. Former police employment is not a blanket licensing exemption.
The event guest-services/crowd-management exception requires all its conditions: no firearm or other dangerous weapon, no clothing readily identifiable as security or police, and no primary responsibility for detention or arrest. It applies only to the organised event’s assembly, operation and departure. Carrying pepper spray, a stun gun or a nightstick defeats that particular exemption; “event staff” on a badge does not decide legal scope.
The in-house exception also preserves armed-guard licensing for specified cannabis transportation/delivery by common-carrier employees. The law covers contract roles including crowd-control guards, armored vehicle guards, armed escorts/bodyguards and burglar-alarm response runners. Sources: RCW 18.170.010 and .020. Continue through the U.S. training and licensing pillar and state requirements hub.
Guard licenses, company principals and business licensing
Guard employment and multiple companies
A regulated guard must work under the direction and supervision of a licensed company principal as that principal’s representative. The statute requires a completed application for each company of employment. Transferring companies requires the prescribed transfer application and fee; an independent card does not authorise operating your own unlicensed contract business.
Company license and qualifying agent
The qualifying owner, partner or corporate agent must satisfy the guard eligibility rules plus either three years of approved managerial, supervisory or administrative security-related experience, or be 21 or older and pass the principal examination. The principal exam requires 85%; WAC states a minimum seven-day wait for a repeat, while DOL’s FAQ says seven working days, so follow DOL’s actual scheduling instructions.
RCW 18.170.080 requires a filed and maintained certificate of comprehensive general liability coverage of at least $25,000 bodily/personal injury and $25,000 property damage. These statutory floors are not a statement that every client contract accepts such low cover. WAC 308-18-100, amended effective February 6, 2026, specifies entity documents, including foreign-corporation authority/registration and partner applications where applicable.
If the qualifying agent stops regular duties, promptly notify DOL by certified or registered mail and obtain a qualified replacement within 60 days of sending notice, unless DOL grants an extension. A company license cannot be assigned or transferred without prior written approval. Its name cannot portray public law enforcement or include “police”.
Business records and reporting
Display the company certificate at the licensed principal office within 72 hours of receipt. Advertising must carry the recorded name, address and license number. Keep training, temporary-card and annual firearm-proficiency records available for inspection for at least three years. Report office location/mailing changes within 10 working days; the statute separately requires material company/officer changes within 30 days.
For deaths or employment termination, the statute requires notice and license return within 30 days; WAC 308-18-165 calls for termination notice without delay. Follow the earlier operational expectation rather than delaying until day 30. Eligibility concerns trigger DOL notice within 72 hours and immediate notice to the relevant local chief law-enforcement officer. A non-range on-duty firearm discharge requires company notice to local law enforcement within 10 business days, alongside any immediate incident response.
Sources: RCW 18.170.030, .060–.080, .110 and .165, WAC 308-18-100, -165, -210, -240 and -310, and DOL company/exam FAQs.
Eligibility, fingerprint order and the 2026 background-check exception
Unarmed applicants must be at least 18 and a U.S. citizen or resident noncitizen, have employment/an offer from a licensed security company or be licensed as a company, complete required training and submit the correct application and fee. Criminal-history decisions under RCW 18.170.030 concern whether the particular crime directly relates to guard duties and whether withholding the license is necessary to protect the public; the statute does not say every conviction automatically disqualifies every applicant.
Apply first, then fingerprint. DOL’s current instructions require a submitted license application and application number before fingerprinting. Inside Washington, use its appointed electronic fingerprint route; outside Washington, DOL directs applicants to local law enforcement for fingerprint submission. Pay the separate service/background charges instructed for the actual category. Armed applications involve a national FBI check under RCW 18.170.130.
2026 statutory amendment: current RCW 18.170.030(6), citing 2026 chapter 36, says an applicant issued a Washington private investigator license under Chapter 18.165 within the last 12 months need not undergo a separate background check to obtain the guard license. This is a specific credential/time exception, not permission to reuse any old fingerprint record from any employer. The general DOL page still says all guards need fingerprint checks; confirm this statutory exception with DOL before paying for duplicate processing.
DOL’s FAQ says issuance may take up to 60 days after a complete application and fee, with company-principal applications potentially taking longer. That estimate does not extend a temporary card or permit armed work. Sources: RCW 18.170.030 and .130, current application sequence, armed instructions and processing FAQ. Use the eligibility checker for planning; DOL decides the application.
Training: eight hours before assignment, calendar deadlines afterward
Pre-assignment: eight hours and a verified exam
Complete at least eight hours before receiving the guard license or temporary card. At least four must be organised/formal instruction; the other four may be formal or individual instruction. The examination must be fully correct, or missed answers reviewed for understanding and initialled by both the applicant and trainer. A mere course attendance certificate does not establish completion of that examination requirement.
The course covers the guard’s role, observation, licensing law, legal powers and limits, detention/search/use of force, emergency response, safety and reporting. A recent full-time sworn peace officer may qualify for a pre-assignment waiver if last employed within five years and the required exam is passed. Military training/experience is recognised subject to the Director’s substantial-equivalence determination; neither route creates an automatic license.
Post-assignment: eight hours by a half-year deadline
RCW 18.170.105 does not use a universal “within 12 months of employment” rule. For an initial license issued January 1–June 30, complete the eight post-assignment hours by June 30 of the following year. For an initial license issued July 1–December 31, the deadline is December 31 of the following year. Training can begin on the day after the company’s temporary card is issued.
For example, an initial DOL license issued May 10, 2026 has a June 30, 2027 post-assignment deadline; one issued October 10, 2026 has a December 31, 2027 deadline. Those are training deadlines, not permission to miss the separate annual license renewal. Employers should record the real initial issuance date and applicable calendar deadline.
Post-assignment topics include ethics, legal duties, evidence, communication, incident reporting, access control, confidential information, emergency procedures, evacuation, safety and post orders. A transferring guard may avoid repeating initial post-assignment training if the receiving company accepts proper signed trainer records or the statutory affidavit of previous completion. Keep the evidence with the receiving employer.
Annual refresher: four hours and a defined start
The subsequent refresher year begins the day after the final statutory post-assignment deadline. Each subsequent year needs at least four hours; no more than one hour may directly cover customer service, and the remaining three must address emergency-response concepts such as post orders or life safety. Annual firearm recertification is a separate armed requirement.
Completed qualifying school safety/security classroom hours may count toward initial post-assignment or annual refresher training under RCW 18.170.105(5). They do not automatically replace pre-assignment instruction. Records must identify topics, dates/hours, trainer attestation and guard signature; electronic records/signatures are permitted. Companies retain detailed records for at least three years.
Sources: RCW 18.170.105 and .310 and WAC 308-18-240, -300 and -305. Supporting reading: incident reports, de-escalation, national training requirements and legal compliance hub.
Armed guard licensing, employer firearms and certificate fees
An armed guard must already hold a guard license, be 21 or older, obtain a current WSCJTC firearm certificate and secure DOL’s armed endorsement. Resident noncitizens must provide proof of the required current noncitizen firearm license on original/renewal applications. An ordinary concealed-pistol license does not replace these occupational requirements.
WAC 139-30 requires an approved initial programme of at least eight hours of instruction and testing with a certified firearms instructor, including written and practical tests and firearm-specific range qualification. The current September 2025 WSCJTC outline describes a separate four-hour recertification course, testing and qualification. Complete the actual approved programme rather than a generic handgun-safety course.
Apply to DOL for the armed license within 90 days after the firearm certificate is issued; otherwise WAC 139-30-010 deems it lapsed for the original armed application. The employer must ensure annual proficiency with every authorised firearm. All on-duty firearms must be employer-owned or employer-leased, not simply a guard’s privately owned gun chosen without a qualifying arrangement.
The certificate expires on the armed DOL license’s expiry under WAC 139-30-025. The current WSCJTC FAQ also describes annual certificates and instructor-submitted renewal rosters. Keep both the issued DOL armed credential and WSCJTC record current; the employer retains annual proficiency proof.
Current WSCJTC process
WSCJTC requires employer submission, with a separate certificate for each employer. Its current FAQ says the guard must hold an active DOL unarmed license before attending initial firearm certification. Adding a firearm does not renew the certificate. Fingerprints go through DOL, not to WSCJTC. Source: WSCJTC’s currently linked FAQ and programme page.
Fees effective July 1, 2026
The May 19 official notice sets $200 issuance, $100 certificate transfer and $100 expired renewal. Renewals submitted within 30 days of expiry continue at no certificate-processing cost; after more than 30 days the $100 charge applies. This fee window does not authorise armed work with an expired credential. Instructor/course charges and DOL license/endorsement charges are separate.
Official-source discrepancy: WSCJTC’s programme page expressly provides a $100 employer-transfer process, while its linked FAQ says certificates cannot transfer between companies and describes a new issuance fee for a new employer. Confirm whether the actual transaction is a recognised transfer or new issuance with WSCJTC before paying; in either case, the old employer’s certificate cannot simply be used for the new employer.
Sources: RCW 18.170.040, .050 and .170, WAC 139-30, September 2025 eight/four-hour outline, May 2026 notice, current programme and linked FAQ.
Application, lawful temporary work and current costs
- Confirm the employer and category. Establish licensed company employment/an offer and the actual unarmed/armed duties, or identify a specific exemption.
- Complete pre-assignment training and examination. Use a licensed certified trainer, record the required eight hours and obtain correct attestation.
- Submit the DOL application and fee. Apply through the official SecureAccess Washington route linked on DOL’s current instructions, or use the current paper form. Obtain the application number before fingerprinting.
- Complete the correct fingerprint route. Check the specific recent-PI-license exception with DOL where relevant; retain submission evidence.
- Use only genuine permitted temporary documentation. For initial unarmed work, the licensed employer may issue DOL’s pre-numbered temporary card after pre-assignment completion and a full application. The statute requires mailing the application within three business days of card issue; companies using online submission should confirm the required documentation with DOL. A company-made badge or receipt is insufficient.
- Observe the card’s limits. Maximum 60 days, only the issuing company, and no firearm authority. Surrender it on expiry, receipt of the permanent credential or notice that the permanent license is withheld. Do not use a new temporary card to work on an expired license.
- For armed work, complete both agency processes. Obtain WSCJTC certification, DOL armed endorsement and the properly qualified employer firearm before carrying on duty.
- Record all deadlines. Annual DOL renewal, the statutory post-assignment date, later refresher years and armed proficiency/certificate renewal are separate obligations.
DOL fees and the pending clarification
The current DOL fee page lists $101 initial guard license, $95 annual renewal, $10 armed endorsement, $25 association/transfer, $25 trainer examination and $15 trainer renewal. Guard late renewal is $110 total, comprising the $95 renewal plus $15 late charge; WAC waives that late charge for renewal submitted with transfer/rehire and exempts inactive licenses from late penalties. DOL printing/mailing is $5 per copy; confirm separate fingerprint service costs.
DOL currently lists $364 company application, $332 company/principal renewal and $442 late company renewal. WAC’s company/principal base entries are $263 application, $237 renewal and $110 late penalty. DOL renewal instructions require renewal of both company and associated principal/qualifying-agent licenses. Use the current official application’s applicable total; the different table presentations should not be silently treated as identical.
The September 2026 DOL notice announces an October 28, 2026 hearing on a proposed WAC 308-18-150 fee clarification. It is not an adopted rule as of this October 6 review and is not used to alter the current fee figures. Sources: current DOL fee table, WAC 308-18-140 and -150, renewal instructions, September hearing notice and RCW 18.170.090.
Annual renewal, inactive licenses and cross-state assignments
DOL licenses renew annually; you may renew up to 120 days before expiry. Update contact details and provide any required legal-background supporting documents. Company renewal includes both the company and associated principal/qualifying-agent credential. Armed officers must also retain their current firearm certificate/proficiency evidence.
Do not work on an expired license. DOL explicitly says temporary cards cannot be used for expired-license guards. WAC cancels a license if renewal has not been received within one year after expiry, after which initial procedures, training and examination requirements apply. That cancellation window is not a year-long permission to practise.
A surrendered inactive license makes its holder unlicensed until properly reissued. It cannot be renewed while inactive, and must be activated and renewed within the rule’s one-year post-expiry limit to avoid cancellation. Follow the actual transfer/reactivation application rather than assuming an old card remains usable.
Out-of-state licenses
RCW 18.170.120 recognises a narrow 90-day temporary assignment for a valid other-state credential when the guard works for the same employer that employs them in their permanent-residence state. It prohibits soliciting Washington business or representing oneself as Washington-licensed. General reciprocity applications and recurring cross-border work require the Director’s equal-requirements determination under .120/.150; no universal reciprocity is promised.
Military training/experience and specified military relocation pathways may assist an application, but the actual DOL determination and credentials still matter. Confirm firearm-certificate and employer arrangements for any armed interstate assignment before relying on a general temporary provision.
Individual reporting: WAC 308-18-230 requires notice of a criminal complaint, information, indictment or conviction within 20 days after service or knowledge. Carry the license card during duties and exhibit it on request. Do not imply sworn-police authority, display prohibited police identifiers or disclose client security information improperly.
Sources: DOL renewal, WAC 308-18-160, -165, -170 and -230, RCW 18.170.070, .120, .150, .160, .170 and .310 and firearms renewal rule.
Planning a Washington security career
Compare each offer’s actual duties, company license, site training, supervision and renewal support. Access-control, healthcare, construction, patrol and event posts can differ in equipment and responsibilities; the job title alone does not establish an exemption or armed authority. Request the post orders and clear reporting procedures before assignment.
A practical progression is to master observation, communication and documentation, complete statutory post-assignment training by its real deadline, then pursue additional responsibility where your employer confirms eligibility. Armed work needs continuing certification and employer support, rather than simply buying a personal firearm.
Continue through the tools hub, salary and pay guide, salary calculator, eligibility checker and state requirements hub. For relocation, compare the actual destination requirements, including Oregon and Idaho.
Washington security guard FAQs
Is Washington post-assignment training always due within 12 months of hire?
No. An initial license issued January–June has an eight-hour post-assignment deadline of June 30 the following year; one issued July–December has a December 31 deadline the following year. Training may begin after the temporary card is issued. Annual license renewal remains separate.
Can Washington event staff carry pepper spray and still use the guest-services exemption?
Not that exemption. RCW 18.170.020 requires no firearm or other dangerous weapon, including pepper mace, stun guns and nightsticks, no security/police-identifiable clothing, and no primary detention/arrest duty. All conditions and the organised-event scope must be met.
Can a Washington temporary guard card authorise armed work or bridge an expired license?
No. A valid initial temporary card is limited to 60 days, the issuing licensed employer and unarmed duties after pre-assignment completion and the required full application. DOL says temporary cards cannot be used for guards whose licenses have expired.
Does the 2026 Washington law allow any old fingerprint record to be reused?
No. RCW 18.170.030(6) specifically exempts a separate guard background check for an applicant issued a Washington private investigator license under Chapter 18.165 within the last 12 months. Confirm that precise exception with DOL; unrelated or older prints do not establish it.
Can a Washington armed guard simply carry their personally owned firearm at work?
RCW 18.170.050 requires on-duty guard firearms to be owned or leased by the employer and covered by the guard’s required proficiency. A personal gun without that qualifying employer arrangement, current WSCJTC certification and DOL armed endorsement does not meet the occupational rules.
Does Washington’s 30-day firearm renewal fee window permit expired armed work?
No. The July 1, 2026 fee schedule allows certificate renewals submitted within 30 days of expiry at no processing cost and charges $100 after more than 30 days. That fee policy does not create permission to work with an expired firearm certificate or DOL armed license.
When does Washington’s four-hour annual refresher obligation begin?
The subsequent training year starts the day after the final statutory deadline for initial post-assignment training. Each subsequent year needs four hours, with at most one directly on customer service and the remaining three on emergency-response concepts. Firearm recertification is separate.
Are the October 2026 Washington fee-rule hearing proposals already law?
No. DOL’s September notice schedules a hearing for October 28, 2026 to clarify WAC 308-18-150 application fees. This October 6 review uses the current official fee table and adopted rule, identifies their company/principal presentation differences, and does not apply a proposed amendment as enacted law.
Legal and accuracy disclaimer
Security Force USA provides general educational information, not legal advice. Confirm the required category, payable charges, issued credentials and any specific exemption with DOL/WSCJTC before relying on them for a work assignment.
Written by Tim Davey · Published · Last updated .
October 6, 2026: Compared the full current statute and guard/firearms rules with current DOL/WSCJTC guidance. Corrected calendar training deadlines, temporary cards, 2026 PI background-check exception, annual renewal and employer-owned/leased firearms. Added July 2026 certificate fees and pending October hearing; disclosed company/transfer source differences. Replaced eight FAQs and matching schema, preserved the original publication date and removed stray code fences.
Update log
- — Refreshed the Washington DOL links, clarified the training pathway (pre-assignment, post-assignment, and annual refresher), updated renewal guidance, expanded armed security notes, refreshed FAQs, and consolidated schema into a single @graph script.



